Color enlarger for all film formats up to 6 x 6 cm (2.4 x 2.4 in.) and lenses up to 80 mm focal length. Can be converted to formats up to 6 x 9 cm.
Compound negative carrier fitted with Anti-Newton glass on top and 6 x 6 format mask on bottom.
Baseboard (WxDxH): approx. 450 x 500 x 28 mm (17.7 x 19.7 x 1.1 in)
Color Enlargers SYSTEM-V
General specifications:
Color mixing head with dichroic interference filters, calibrated in densitometric values up to 180. Dials are indirectly illuminated. Whitelight lever for simultaneous swinging in or out of filters, with control light. Continuously adjustable density aperture up to 60 densitometric densities (= two aperture settings). Best possible light distribution due to special diffusor plate and exchangeable double condensor system. UV and IR filters. Filter drawer.
Removable compound negative carrier with interchangeable inserts, adjustable masking strips, adjustable film stops and grid pins. Lens stage with spirit level and red filter, tiltable for distortion correction on Scheimpflug principle. Quick change attachment for lenses. Height adjustment by hand-crank operated friction drive on plastic bearings. Wall and floor projection possible.
Wide, vibration-resistant column of embossed aluminium tubing, with dull black anodized surface, cm and inch scales and markings for enlarging scales. Matt-gray laminated baseboard with individually height-adjustable feet. Spirit level on column base.
Technical specifications:
Lamp: Halogen cold light mirror lamp, 12 V, 100 W, socket GZ 6,35
Cord: approx. 1,80 m (6 ft.)
Filter drawer: 85 x 85 mm (3.3 x 3.3 in.)
Column (HxWxD): approx. 1000 x 70 x 35 mm (39.4 x 2.8 x 1.4 in.)
Distance between optical axis and column base: approx. 220 mm (8.7 in.)
Can be converted into a copy stand or a slide duplicator.
Scope of supply: Incl. compound negative carrier, lamp and dust hood, without lens, without transformer.

Color enlarger for all film formats up to 6 x 7 cm (2.4 x 2.8 in.) and lenses up to 105 mm focal length. Can be converted to a 6 x 9 enlarger.
Compound negative carrier fitted with Anti-Newton glass on top and 6 x 7 format mask on bottom.
Focusing with additional fine drive. Height adjustment with weight compensation by a roll-off spring mechanism.
Filter holder for square filters and framed Multigrade® filters, can be swung out and adjusted in height, with diffusor plate for integral metering.
Baseboard (WxDxH): approx. 600 x 500 x 32 mm (23.6 x 19.7 x 1.3 in.)
Color Enlargers SYSTEM-V
General specifications:
Color mixing head with dichroic interference filters, calibrated in densitometric values up to 180. Dials are indirectly illuminated. Whitelight lever for simultaneous swinging in or out of filters, with control light. Continuously adjustable density aperture up to 60 densitometric densities (= two aperture settings). Best possible light distribution due to special diffusor plate and exchangeable double condensor system. UV and IR filters. Filter drawer.
Removable compound negative carrier with interchangeable inserts, adjustable masking strips, adjustable film stops and grid pins. Lens stage with spirit level and red filter, tiltable for distortion correction on Scheimpflug principle. Quick change attachment for lenses. Height adjustment by hand-crank operated friction drive on plastic bearings. Wall and floor projection possible.
Wide, vibration-resistant column of embossed aluminium tubing, with dull black anodized surface, cm and inch scales and markings for enlarging scales. Matt-gray laminated baseboard with individually height-adjustable feet. Spirit level on column base.
Technical specifications:
Lamp: Halogen cold light mirror lamp, 12 V, 100 W, socket GZ 6,35
Cord: approx. 1,80 m (6 ft.)
Filter drawer: 85 x 85 mm (3.3 x 3.3 in.)
Column (HxWxD): approx. 1000 x 70 x 35 mm (39.4 x 2.8 x 1.4 in.)
Distance between optical axis and column base: approx. 220 mm (8.7 in.)
Can be converted into a copy stand or a slide duplicator.
Scope of supply: Incl. compound negative carrier, lamp and dust hood, without lens, without transformer.

Color enlarger for all film formats up to 6 x 9 cm (2.4 x 3.5 in.) and lenses up to 105 mm focal length. Compound negative carrier fitted with Anti-Newton glass on top and flat glass on bottom. Focusing with additional fine drive. Height adjustment with weight compensation by a roll-off spring mechanism. Filter holder for square filters and framed Multigrade® filters, can be swung out and adjusted in height, with diffusor plate for integral metering. Baseboard (WxDxH): approx. 600 x 500 x 32 mm (23.6 x 19.7 x 1.3 in.) Color Enlargers SYSTEM-V General specifications: Color mixing head with dichroic interference filters, calibrated in densitometric values up to 180. Dials are indirectly illuminated. Whitelight lever for simultaneous swinging in or out of filters, with control light. Continuously adjustable density aperture up to 60 densitometric densities (= two aperture settings). Best possible light distribution due to special diffusor plate and exchangeable double condensor system. UV and IR filters. Filter drawer.
Removable compound negative carrier with interchangeable inserts, adjustable masking strips, adjustable film stops and grid pins. Lens stage with spirit level and red filter, tiltable for distortion correction on Scheimpflug principle. Quick change attachment for lenses. Height adjustment by hand-crank operated friction drive on plastic bearings. Wall and floor projection possible.
Wide, vibration-resistant column of embossed aluminium tubing, with dull black anodized surface, cm and inch scales and markings for enlarging scales. Matt-gray laminated baseboard with individually height-adjustable feet. Spirit level on column base.
Technical specifications:
Lamp: Halogen cold light mirror lamp, 12 V, 100 W, socket GZ 6,35
Cord: approx. 1,80 m (6 ft.)
Filter drawer: 85 x 85 mm (3.3 x 3.3 in.)
Column (HxWxD): approx. 1000 x 70 x 35 mm (39.4 x 2.8 x 1.4 in.)
Distance between optical axis and column base: approx. 220 mm (8.7 in.)
Can be converted into a copy stand or a slide duplicator.
Scope of supply: Incl. compound negative carrier, lamp and dust hood, without lens, without transformer.

B & W enlarger for 35 film (24 x 36 mm) and lenses up to 50 mm focal length. Can be converted to formats up to 6 x 9 cm.
Compound negative carrier fitted with 35 mm (24 x 36 mm) format masks.
Baseboard (WxDxH): approx. 450 x 500 x 28 mm (17.7 x 19.7 x 1.1 in.)
B & W Enlargers SYSTEM-V
General specifications:
Lamp head with 75 W opal lamp, lamp adjustable. Exchangeable double condensor system. Filter drawer.
Removable compound negative carrier with interchangeable inserts, adjustable masking strips, adjustable film stops and grid pins. Lens stage with spirit level and red filter, tiltable for distortion correction on Scheimpflug principle. Quick change attachment for lenses. Height adjustment by hand-crank operated friction drive on plastic bearings. Wall and floor projection possible.
Wide, vibration-resistant column of embossed aluminium tubing, with dull black anodized surface, cm and inch scales and markings for enlarging scales. Matt-gray laminated baseboard with individually height-adjustable feet. Spirit level on column base.
Technical specifications:
Lamp: Opal lamp 75 W, E 27 socket
Cord: approx. 2.50 m (8 ft. 2 in.)
Filter drawer: 85 x 85 mm (3.3 x 3.3 in.)
Column (HxWxD): approx. 1000 x 70 x 35 mm (39.4 x 2.8 x 1.4 in.)
Distance between optical axis and column base: approx. 220 mm (8.7 in.)
Can be converted into a copy stand.
Scope of supply: Incl. compound negative carrier, lamp and dust hood, without lens.

Multigrade® enlarger for all film formats up to 6 x 6 cm (2.4 x 2.4 in.) and lenses up to 80 mm focal length. Can be converted to formats up to 6 x 9 cm.
Compound negative carrier fitted with Anti-Newton glass on top and 6 x 6 format mask on bottom.
Baseboard (wxDxH): approx. 450 x 500 x 28 mm (17.7 x 19.7 x 1.1 in.)

Multigrade® Enlargers SYSTEM-V
General specifications:
Multigrade® head with dichroic color filter for use with variable gradation paper without changing the exposure time. Scale dial indirectly illuminated with index numbers in half steps from 0 (extra soft) to 5 (extra hard) for stepless contrast control. White-light lever for simultaneous swinging in or out of filters, with control light. Continuously adjustable density aperture up to 60 densitometric densities (= two aperture settings). Best possible light distribution due to special diffusor plate and exchangeable double condensor system. UV and IR filters. Filter drawer.
Removable compound negative carrier with interchangeable inserts, adjustable masking strips, adjustable film stops and grid pins. Lens stage with spirit level and red filter, tiltable for distortion correction on Scheimpflug principle. Quick change attachment for lenses. Height adjustment by hand-crank operated friction drive on plastic bearings. Wall and floor projection possible.
Wide, vibration-resistant column of embossed aluminium tubing, with dull black anodized surface, cm and inch scales and markings for enlarging scales. Matt-gray laminated baseboard with individually height-adjustable feet. Spirit level on column base.
Technical specifications:
Lamp: Halogen cold light mirror lamp, 12 V, 100 W, socket GZ 6,35
Cord: approx. 1,80 m (6 ft.)
Filter drawer: 85 x 85 mm (3.3 x 3.3 in.)
Column (HxWxD): approx. 1000 x 70 x 35 mm (39.4 x 2.8 x 1.4 in.)
Distance between optical axis and column base: approx. 220 mm (8.7 in.)
Can be converted into a copy stand.
Scope of supply: Incl. compound negative carrier, lamp and dust hood, without lens, without transformer.

Multigrade® enlarger for all film formats up to 6 x 7 cm (2.4 x 2.8 in.) and lenses up to 105 mm focal length. Can be converted to a 6 x 9 enlarger.
Compound negative carrier fitted with Anti-Newton glass on top and 6 x 7 format mask on bottom.
Focusing with additional fine drive. Height adjustment with weight compensation by a roll-off spring mechanism.
Filter holder for square filters and framed Multigrade® filters, can be swung out and adjusted in height, with diffusor plate or integral metering.
Baseboard (WxDxH): approx. 600 x 500 x 32 mm (23.6 x 19.7 x 1.3 in.)
Multigrade® Enlargers SYSTEM-V
General specifications:
Multigrade® head with dichroic color filter for use with variable gradation paper without changing the exposure time. Scale dial indirectly illuminated with index numbers in half steps from 0 (extra soft) to 5 (extra hard) for stepless contrast control. White-light lever for simultaneous swinging in or out of filters, with control light. Continuously adjustable density aperture up to 60 densitometric densities (= two aperture settings). Best possible light distribution due to special diffusor plate and exchangeable double condensor system. UV and IR filters. Filter drawer.
Removable compound negative carrier with interchangeable inserts, adjustable masking strips, adjustable film stops and grid pins. Lens stage with spirit level and red filter, tiltable for distortion correction on Scheimpflug principle. Quick change attachment for lenses. Height adjustment by hand-crank operated friction drive on plastic bearings. Wall and floor projection possible.
Wide, vibration-resistant column of embossed aluminium tubing, with dull black anodized surface, cm and inch scales and markings for enlarging scales. Matt-gray laminated baseboard with individually height-adjustable feet. Spirit level on column base.
Technical specifications:
Lamp: Halogen cold light mirror lamp, 12 V, 100 W, socket GZ 6,35
Cord: approx. 1,80 m (6 ft.)
Filter drawer: 85 x 85 mm (3.3 x 3.3 in.)
Column (HxWxD): approx. 1000 x 70 x 35 mm (39.4 x 2.8 x 1.4 in.)
Distance between optical axis and column base: approx. 220 mm (8.7 in.)
Can be converted into a copy stand.
Scope of supply: Incl. compound negative carrier, lamp and dust hood, without lens, without transformer.

Multigrade® enlarger for all film formats up to 6 x 9 cm (2.4 x 3.5 in.) and lenses up to 105 mm focal length.
Compound negative carrier fitted with Anti-Newton glass on top and flat glass on bottom.
Focusing with additional fine drive. Height adjustment with weight compensation by a roll-off spring mechanism.
Filter holder for square filters and framed Multigrade® filters, can be swung out and adjusted in height, with diffusor plate for integral metering.
Baseboard (WxDxH): approx. 600 x 500 x 32 mm (23.6 x 19.7 x 1.3 in.)
Multigrade® Enlargers SYSTEM-V
General specifications:
Multigrade® head with dichroic color filter for use with variable gradation paper without changing the exposure time. Scale dial indirectly illuminated with index numbers in half steps from 0 (extra soft) to 5 (extra hard) for stepless contrast control. White-light lever for simultaneous swinging in or out of filters, with control light. Continuously adjustable density aperture up to 60 densitometric densities (= two aperture settings). Best possible light distribution due to special diffusor plate and exchangeable double condensor system. UV and IR filters. Filter drawer.
Removable compound negative carrier with interchangeable inserts, adjustable masking strips, adjustable film stops and grid pins. Lens stage with spirit level and red filter, tiltable for distortion correction on Scheimpflug principle. Quick change attachment for lenses. Height adjustment by hand-crank operated friction drive on plastic bearings. Wall and floor projection possible.
Wide, vibration-resistant column of embossed aluminium tubing, with dull black anodized surface, cm and inch scales and markings for enlarging scales. Matt-gray laminated baseboard with individually height-adjustable feet. Spirit level on column base.
Technical specifications:
Lamp: Halogen cold light mirror lamp, 12 V, 100 W, socket GZ 6,35
Cord: approx. 1,80 m (6 ft.)
Filter drawer: 85 x 85 mm (3.3 x 3.3 in.)
Column (HxWxD): approx. 1000 x 70 x 35 mm (39.4 x 2.8 x 1.4 in.)
Distance between optical axis and column base: approx. 220 mm (8.7 in.)
Can be converted into a copy stand.
Scope of supply: Incl. compound negative carrier, lamp and dust hood, without lens, without transformer.

For sizes up to 24 x 36 mm (35 mm film) and lenses up to 50 mm focal length. Floor projection possible. Removable compound negative carrier with negative masks for size 24 x 36 mm and slide sizes 5 x 5 cm (2 x 2 in.). Optically ground single condenser. Red filter within bellows extension for dust protection. Can accomodate filter drawer. Height adjustment by hand crank-operated friction dirve on plastiv bearings. Column with cm and inch scales.
The enlarger is convertible to sizes up to 6 x 9 cm and to a Color or Multigrade enlager.
Supplied with compound negative carrier and lamp, without lens.
Specifications:
Baseboard (WxHxD): approx. 400 x 420 x 25 mm (15.7 x 16.5 x 1 in.)
Height of column: approx. 760 mm (30 in.)
Maximum enlargement on baseboard: 24 x 30 cm (9.4 x 4.8 in.)
Lamp: Opal lamp 75 W
Cord: ca. 2.50 m (8 ft. 2 in.)

B & W enlarger for all film formats up to 6 x 7 cm (2.4 x 2.8 in.) and lenses up to 105 mm focal length. Can be converted to a 6 x 9 enlarger. Compound negative carrier fitted with Anti-Newton glass on top and 6 x 7 format mask on bottom. Focusing with additional fine drive. Height adjustment with weight compensation by a roll-off spring mechanism. Filter holder for square filters and framed Multigrade® filters, with diffusor plate for integral metering. Baseboard (WxDxH): approx. 600 x 500 x 32 mm (23.6 x 19.7 x 1.3 in.) B & W Enlargers SYSTEM-V
General specifications:
Lamp head with 75 W opal lamp, lamp adjustable. Exchangeable double condensor system. Filter drawer.
Removable compound negative carrier with interchangeable inserts, adjustable masking strips, adjustable film stops and grid pins. Lens stage with spirit level and red filter, tiltable for distortion correction on Scheimpflug principle. Quick change attachment for lenses. Height adjustment by hand-crank operated friction drive on plastic bearings. Wall and floor projection possible.
Wide, vibration-resistant column of embossed aluminium tubing, with dull black anodized surface, cm and inch scales and markings for enlarging scales. Matt-gray laminated baseboard with individually height-adjustable feet. Spirit level on column base.
Technical specifications:
Lamp: Opal lamp 75 W, E 27 socket
Cord: approx. 2.50 m (8 ft. 2 in.)
Filter drawer: 85 x 85 mm (3.3 x 3.3 in.)
Column (HxWxD): approx. 1000 x 70 x 35 mm (39.4 x 2.8 x 1.4 in.)
Distance between optical axis and column base: approx. 220 mm (8.7 in.)
Can be converted into a copy stand.
Scope of supply: Incl. compound negative carrier, lamp and dust hood, without lens.

To extend the camera arm mount. Required for capturing large originals. This increases the distance between the optical axis of the camera lens and the column base by 80 mm (3.2 in.), if the extension arm is attached between the mount and the camera arm.

B & W enlarger for all film formats up to 6 x 9 cm (2.4 x 3.5 in.) and lenses up to 105 mm focal length. Compound negative carrier fitted with Anti-Newton glass on top and flat glass on bottom. Focusing with additional fine drive. Height adjustment with weight compensation by a roll-off spring mechanism. Filter holder for square filters and framed Multigrade® filters, can be swung out and adjusted in height, with diffusor plate for integral metering. Baseboard (WxDxH): approx. 600 x 500 x 32 mm (23.6 x 19.7 x 1.3 in.) B & W Enlargers SYSTEM-V
General specifications:

Lamp head with 75 W opal lamp, lamp adjustable. Exchangeable double condensor system. Filter drawer.
Removable compound negative carrier with interchangeable inserts, adjustable masking strips, adjustable film stops and grid pins. Lens stage with spirit level and red filter, tiltable for distortion correction on Scheimpflug principle. Quick change attachment for lenses. Height adjustment by hand-crank operated friction drive on plastic bearings. Wall and floor projection possible.
Wide, vibration-resistant column of embossed aluminium tubing, with dull black anodized surface, cm and inch scales and markings for enlarging scales. Matt-gray laminated baseboard with individually height-adjustable feet. Spirit level on column base.
Technical specifications:
Lamp: Opal lamp 75 W, E 27 socket
Cord: approx. 2.50 m (8 ft. 2 in.)
Filter drawer: 85 x 85 mm (3.3 x 3.3 in.)
Column (HxWxD): approx. 1000 x 70 x 35 mm (39.4 x 2.8 x 1.4 in.)
Distance between optical axis and column base: approx. 220 mm (8.7 in.)
Can be converted into a copy stand.
Scope of supply: Incl. compound negative carrier, lamp and dust hood, without lens.

Output power: 100 W
Dimensions: approx. 120 x 80 x 140 mm (4.7 x 3.1 x 5.5 in.)
Available for 230 V, 240 V, and 120 V
Fuse: 1,6 AT (230/240 V) / 2,5 AT (120 V)
Without voltage stabilization.
Input: 230 V, 50 Hz
Output: 12 V, 50 Hz

Output power: 100 W
Dimensions: approx. 120 x 80 x 140 mm (4.7 x 3.1 x 5.5 in.)
Available for 230 V, 240 V, and 120 V
Fuse: 1,6 AT (230/240 V) / 2,5 AT (120 V)
Transformer with starting-current limitation and electronic voltage stabilization. For compensation of voltage deviations (for constant color temperature).
Input: 230 V, + 10%, -15%, 50 Hz
Output: 11,5 V ± 1%, 50 Hz

For insertion into the compound negative carrier of SYSTEM-V enlargers and for compound negative carrier. Dimensions: approx. 100 x 72.5 mm (3.9 x 2.9 in.)
Anti Newton glass

For insertion into the 4583 compound negative carrier of SYSTEM-V enlargers and for 4493 compound negative carrier. Dimensions: approx. 100 x 72.5 mm (3.9 x 2.9 in.)
Anti Newton glass/flat glass

For insertion into compound negative carrier of SYSTEM-V enlargers and for compound negative carrier. Pairs of masks.
Dimensions: approx. 100 x 72.5 mm (3.9 x 2.9 in.)
Format masks 4,5 x 6 cm

For insertion into compound negative carrier of SYSTEM-V enlargers and for compound negative carrier. Pairs of masks.
Dimensions: approx. 100 x 72.5 mm (3.9 x 2.9 in.)
Format masks 6 x 6 cm

For insertion into compound negative carrier of SYSTEM-V enlargers and for compound negative carrier. Pairs of masks.
Dimensions: approx. 100 x 72.5 mm (3.9 x 2.9 in.)
Format masks 6 x 7 cm

For insertion into compound negative carrier of SYSTEM-V enlargers and for compound negative carrier. Pairs of masks. Dimensions: approx. 100 x 72.5 mm (3.9 x 2.9 in.)
Panorama format masks 24 x 66 mm, e.g. for Hasselblad X-pan, Noblex 135 and Mamiya 7 with 35 mm panorama insert.

For insertion into the compound negative carrier of SYSTEM-V enlargers and for compound negative carrier.
Dimensions: approx. 100 x 72.5 mm (3.9 x 2.9 in.)
Without cut-out. For „do-it-yourself“ cut.
1 pair.